Surgical Tools Ultrasonic Cleaner 4.5 Liters

• Customization: Available
• Automation: Semi-automatic
• Drainage: No
• Model NO.: 030S
• Heating: Yes
• Application: Commercial
• Spcial Two: Digital Control
• Ultrasonic Frequncy: 40kHz
• Tank Capacity: 4.5L
• Ultrasonic Power: 180W
• Tank Size: 300 X 150 X 100 mm&Nbsp; ( L x W x H )
• Heating Power: 150W
• Timer: 1-30 Minutes Control
• Transport Package: 1 Set /Carton
• Specification: stainless steel
• Trademark: Skymen
• Origin: Shenzhen, China (Mainland)
• HS Code: 8479899990
• Production Capacity: 5000PCS / Month

Product Description

4.5L Lab ultrasonic cleaner SUS304 material

Products image:




Products specification:

Ultrasonic Frequency	40,000 Hz
Material	Stainless Steel SUS304
Tank Capacity	4.5 L
Timer	1-30minutes , Digital timer
Heater	20°C to 80°C
Power Supply	AC 100 ~ 120V, 50 / 60Hz
	AC 220 ~ 240V, 50 / 60 Hz
Ultrasonic Power	180W
Heating Power	150 W , Digital Heating
Tank Size	300 x 150 x 100 mm  ( L x W x H )

Features:
1. Lower noise.
2. tank capacity:4.5L(1.05gallon), with Digital timer & heater control
3. with Stainless steel basket
4.Use just tab water, or industrial alcohol and solvent cleaner for more higher cleaning requirement
5.industrial control chip microcontroller.flexible circuit boards control, more secure & stable
6.Certifications : CE & RoHS & ISO9001.

 

Packing:

Tank Size	300 x 150 x 100 mm  ( L x W x H )
Unit Size	330 x 180 x 225 mm  ( L x W x H )
Package Size	410 x 255 x 310 mm  ( L x W x H )
N.W.	5 kg
G.W.	7 kg

Professional Use: 
Medical and dental clinics, tattooists, laboratories, opticians, watchmakers, restaurants, and antique dealers.
The ultrasonic cleaner uses ultrasonic waves (vibration) using water with detergents or enzymatic products to break up soil and organic material on medical instruments/devices. These devices are rinsed then autoclaved (sterilized). The autoclave sterilizer uses heat, steam, and pressure to kill all pathogenic microorganisms and their spores.

Excellent for cleaning:
Jewelry: Earrings, Necklaces, Rings, Bracelets and Diamonds.
Glasses and Timepieces: Glasses, Sunglasses, Optical Lenses, Contact Lens Accessories, Watch Chains and Waterproof Watches.
Tools of the Trade: Tattoo Guns and Tubes, Electric Shaving Heads, Razor Blades, Combs and Toothbrushes.
Stationery: Printer-heads, Ink Cartridges and Seals.
Metal Articles: Antique Coins, Badges, Valves, Machine Nozzles, Electronic Components and Mechanical Parts.
Metal Dishware: Forks, Knives, Spoon, Other Small Silverware etc.

Suggested Ultrasonic Cleaning Procedure

In all cases manufacturers' instructions should be followed when using an ultrasonic cleaning process. These are representative steps.

Fill the ultrasonic cleaning tank with an approved medical instrument cleaning solution such as CLN-LR012 available from Tovatech following dilution instructions provided. Turn the cleaner on to start the degassing process. This step removes entrained air in new solutions that interferes with the efficiency of cavitation and takes approximately 10 minutes.

In the meantime:

• Segregate instruments by alloy or composition to avoid potential damage (Chromium plated instruments should not be cleaned ultrasonically)
• Instruments with movable parts should be disassembled to facilitate cleaning
• Place the instruments the ultrasonic cleaner's mesh basket, taking care that they do not come in contact with each other
• Cannulated or lumened instruments should be positioned to insure interiors are wetted with the cleaning solution. In some instances placing them on an angle will facilitate this
• Set the control panel per manufacturers' instructions and start the cleaning process

At the end of the cycle, remove the instruments from the ultrasonic cleaning bath and thoroughly rinse them to remove all traces of the cleaning solution. Deionized water rinses will avoid spotting. If the instruments are not to be immediately disinfected and sterilized be certain that they are thoroughly dried and protected. Part reassembly can occur after sterilization.

Procedures should be in place to guide the replacement of used ultrasonic cleaning solutions. In some instances it is recommended that solution be drained and tanks thoroughly cleaned and dried after each ultrasonic cleaning cycle. Most solutions available today are biodegradable, which facilitates disposal but local authorities should be consulted on proper practices.

 

FAQ:
 
Q: What frequency is better for my parts?
A:  Frequency is suggested based on pollutants in the objects. 
28kHz frequency is stronger, better for car/motor/truckessel parts clean (remove oils, grease, pastes, etc. )
40kHz is better for pcb boards, electronic parts, etc. 
Higher precision goods, higher frequency. 
 
Q: Can ultrasonic cleaning damage parts?
A: Although the effect of thousands of implosions per second is very powerful, the cleaning process is safe. No damage to your daily objects.
 
Q: What cleaning solution should I use?
A:A large variety of different formulas designed for specific applications. Proper selection is crucial for acceptable cleaning activity and to prevent unwanted reactions with the workpiece.
 
Q: Is rinsing after cleaning cycles?
A: Rinsing is recommended to remove any chemical residue that could be harmful to the part. Details can be rinsed right in your ultrasonic cleaner or in a clean water bath or in a separate sink tap, distilled or deionized water.

Skymen Cleaning Equipment Shenzhen Co., Ltd., which engaged in ultrasonic cleaner field for more than 10 years. Our main products are ultrasonic cleaner with different capacity.

Our company is a famous ultrasonic manufacturer with R&D, production and sales. High quality product and after sales services is available from us.

Not only standard ultrasonic cleaner, any non-standard can be design by our engineer.