| Customization: | Available |
|---|---|
| Application: | Commercial Cleaning |
| Cleaning Media: | Wet Cleaning |
|
Still deciding? Get samples of US$ 340/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Ultrasonic Frequency | 40KHz |
| Material | Stainless Steel SUS304 |
| Tank Capacity | 30L |
| Timer | 1-30minutes , Mechanical timer |
| Heater | 20°C to 80°C, Mechanical Heating |
| Power Supply | AC 100 ~ 120V, 50 / 60Hz |
| AC 220 ~ 240V, 50 / 60 Hz | |
| Ultrasonic Power | 600 W |
| Heating Power | 500 W |
| Tank Size | 500 x 300 x 200 mm ( L x W x H ) |
| Unit Size | 530 x 325 x 325 mm ( L x W x H ) |
Extra-thick 0.4inches(1.0mm) Stainless Steel 304 inner tank with silver ion oxidation cover and smooth coasted layer, it is corrosion and good stability.
Sound insulation silica gel material is soft that has the function of shock absorption, we stick it all round the inner tank, it can effectively reduce the spread of noise of ultrasonic vibration, thereby protecting hearing from harmful noise.
Plastic handle at both side for easy machine movement. more convenient and protect hands hurt.
SUS304 stainless steel basket is to decrease collision between sharp items and tank, which ensures it for long-term use; Also can be used to drip dry items, experience more comfortable
High heating power can heat water faster than others. Heating can decrease the adhesive strength of oil and wax to certain stuffs to be cleaned, make the cleaning solution much easiler to create cavitations under ultrasonic wave and strengthen cavitation so as to increase the cavitation level of cleaning solution, and then enhance the cleaning effect
1. stainless steel tank has resistance to wear and long work life.
2. tank capacity:22L,with mechanical timer & heater control
3. with Stainless steel basket
4.Use just tab water, or industrial alcohol and solvent cleaner for more higher cleaning requirement
5.industrial control chip microcontroller.flexible circuit boards control, more secure & stable
6,1 year warranty,and parts free to send for fix.
7,FCC CE ROHS ISO9001 SGS certification
Suggested Ultrasonic Cleaning Procedure
In all cases manufacturers' instructions should be followed when using an ultrasonic cleaning process. These are representative steps.
Fill the ultrasonic cleaning tank with an approved medical instrument cleaning solution such as CLN-LR012 available from Tovatech following dilution instructions provided. Turn the cleaner on to start the degassing process. This step removes entrained air in new solutions that interferes with the efficiency of cavitation and takes approximately 10 minutes.
In the meantime:
At the end of the cycle, remove the instruments from the ultrasonic cleaning bath and thoroughly rinse them to remove all traces of the cleaning solution. Deionized water rinses will avoid spotting. If the instruments are not to be immediately disinfected and sterilized be certain that they are thoroughly dried and protected. Part reassembly can occur after sterilization.
Procedures should be in place to guide the replacement of used ultrasonic cleaning solutions. In some instances it is recommended that solution be drained and tanks thoroughly cleaned and dried after each ultrasonic cleaning cycle. Most solutions available today are biodegradable, which facilitates disposal but local authorities should be consulted on proper practices.
The ultrasonic cleaner uses ultrasonic waves (vibration) using water with detergents or enzymatic products to break up soil and organic material on medical instruments/devices. These devices are rinsed then autoclaved (sterilized). The autoclave sterilizer uses heat, steam, and pressure to kill all pathogenic microorganisms and their spores.
Package Includes:
1 x Digital Ultrasonic Cleaner
1 x Cleaning Basket
1 x Manual
Cleaning effect:
Warranty:
1 Year warranty for Skymen ultrasonic cleaner.
If any technical problem during warranty time, replacement parts will be sent free of charge. And technical support is also available after 1 year.
FAQ:
Q: What frequency is better for my parts?
A: Frequency is suggested based on pollutants in the objects.
28kHz frequency is stronger, better for car/motor/truckessel parts clean (remove oils, grease, pastes, etc. )
40kHz is better for pcb boards, electronic parts, etc.
Higher precision goods, higher frequency.
Q: Can ultrasonic cleaning damage parts?
A: Although the effect of thousands of implosions per second is very powerful, the cleaning process is safe. No damage to your daily objects.
Q: What cleaning solution should I use?
A:A large variety of different formulas designed for specific applications. Proper selection is crucial for acceptable cleaning activity and to prevent unwanted reactions with the workpiece.
Q: Is rinsing after cleaning cycles?
A: Rinsing is recommended to remove any chemical residue that could be harmful to the part. Details can be rinsed right in your ultrasonic cleaner or in a clean water bath or in a separate sink tap, distilled or deionized water.
Skymen Cleaning Equipment Shenzhen Co., Ltd., which engaged in ultrasonic cleaner field for more than 10 years. Our main products are ultrasonic cleaner with different capacity.
Our company is a famous ultrasonic manufacturer with R&D, production and sales. High quality product and after sales services is available from us.
Not only standard ultrasonic cleaner, any non-standard can be design by our engineer.
){kind=link}