Ultrasonic Cleaner, Gun Parts, Fire Arms manufacturer / supplier in China, offering Power Adjustable with Time Control Ultrasonic Cleaner for Long Rifle, Car Parts Ultrasonic Cleaner Customized Ultrasonic Cleaner for Car Parts Cleaning (JTS-1036), Skymen Ultrasonic Cleaner 160L for Filter Cleaning Ultrasonic Cleaning Machine and so on.
|Min. Order / Reference FOB Price||1 Piece||US $1,000-6,000/ Piece|
|Payment Terms:||T/T, Paypal|
|Cleaning Media:||Wet Cleaning|
|Cleaning Precision:||Ultra-Precision Industrial Cleaning|
|Principle:||Physical and Chemical Cleaning|
Power Adjustable With Time Control Bench Top Ultrasonic cleaner For Long Rifle
1.Why We Clean Gun Parts With Ultrasonic Cleaner
(1) Ultrasonic cleaner can clean your rifle in about 10-20 mins.
(2) Ultrasonic cleaner can clean every direction of your rifle including blind hole.
(3) It will save your time and labor
2.Feature of rifle ultrasonic cleaner.
Ultrasonic transducers mounted to the tank bottom produce high frequency sound waves which cause rapidly alternating high & low pressure conditions in the cleaning solution. Millions of microscopic bubbles form and then implode (a process called cavitation) resulting in an intense scrubbing action that removes fouling even in the smallest indentations, grooves and impossible to reach by hand areas.
Using water based detergents with rust inhibitor and heat, unburned powder, carbon, lint, oil & dirt will be quickly removed from the field stripped gun parts usually within 4-6 minutes of immersion with minimal hand labor. Heated ultrasonic cleaning, followed by rinsing and ultrasonic lubrication with supplied lube pan and special oil, insures that the parts are moisture free and protected. After excess lubricant is removed from the parts with compressed air, they can be lubricated in accordance with manufacturer's instructions or your S.O.P.
The parts are then restored to factory new level of cleanliness which could not be achieved by the usual hand cleaning methods. The process does not affect night sights, rubber grips, and plastic frames or leave the parts dried out and unprotected.
4.How To Clean Your Gun Parts With Ultrasonic Cleaner.
(1). Field strip the gun
(2.) Swab the bore with a good defouler like Hoppes #9
(3). Insert the stainless steel basket into the ultrasonic cleaning system
(4.) Insert the polycarbonate tray into the stainless steel basket Ride The Waves Ultrasonic Gun Cleaning Equipment
(5). Add cleaning solution concentrate Cleaning Solution
(6). Turn heating unit on to 50 degrees C
(7). Insert gun parts into the ultrasonic cleaner
(8). Set the cleaning time for between 5 and 30 minutes, depending on how dirty the gun is. (Light maintenance on the lower end of the time scale, heavy cleaning on the higher end of the time scale.)
(9). Turn the ultrasonic cleaner on
(10). Check guns periodically for cleanliness
(11). When clean, turn off heat and the ultrasonic unit
(12). Swab the bore with a good defouler like Hoppes #9
(13). Always lubricate your gun after cleaning
5.Feature Of JTS-1010
6.Specidication of JTS-1010
|Tank capacity||30L||Timer||1-99 mins|
90.8 x 20.5 x 15.9 cm
|Unit size||97.8 x 27.3 x 35.6 cm|
|Box packing||114.3 x 38.1 x 44.5 cm||Function||Degasing/Draining|
|Ultrasonic power||600W||Heating power||500W|
AC 100 ~ 120V, 60Hz ; AC 220 ~ 240V, 50Hz