Fast Remove Oil Easy Operating 360L Ultrasonic Bath for Carburettor

• Customization: Available
• Material: SUS304/SUS316
• Ultrasonic Power: 3600W
• Model NO.: JTS-1072
• Function: Repair Shop Cleaning
• Transport Package: Standard Wood Case Packing
• Specification: 1100x600x980mm
• Trademark: Skymen
• Origin: China Mainland
• HS Code: 8479899990
• Production Capacity: 200PCS/Month

Product Description

Fast Remove Oil Easy Operating 360L Ultrasonic Bath For Carburettor
 

1.Application:

(1)Auto repair shop daily cleaning

For auto repair shop daily cleaning job, covering engine block,engine parts,fuel injector, carburetor,spark plug and other target car parts in your workshop.

Big capacity will allow you to clean a lot of objects at one time.

Target Contaminant Removing: Usually carbon,dust,rust,oil can be removed with suitable cleaning solution.

(2)Engine Block Rebuilding And Restoring

When you start to rebuild and restore your old engine, ultrasonic cleaner will be much helpful to remove oil,dust,rust,carbon on the surface of engine block.

2.Cleaning Tips For Carburettor

• After you've pulled the carburetor, make sure it's free of gas. Twist it around, blow it off and give it a quick once over. You don't want any gasoline contaminating the process.
• Brush off any loose dirt and grime, and give the carburetor a quick blast with canned carburetor cleaner. This isn't so much to clean the carburetor, it helps, but it's really to keep the ultrasonic cleaning fluid free of crud.
• Take off all the gaskets, seals and any rubber. You'll probably be replacing all these things anyway, so why bother to clean them? Even if you don't replace them, take them off so the carburetor gets max exposure to the ultrasonic's.
• Remove the float bowls. You want as much of the carburetor's internal guts exposed to the ultrasonic cleaning fluid as possible. Removing the floats help the cavitations get at all the nooks and crannies inside the carburetor.
• Put the carburetor in the system for about two minutes, and then pull it out and check it. You want to make sure that the parts are all aluminum alloys. Sometimes, if a carburetor has other alloys like nickel, the ultrasonic can blacken and pit the metal. You just want to be sure you know what you're working with.
• Don't overload the system. Just because you have a big tank doesn't mean you should jam it full of parts! Make sure there is good space around each part you put in the tank. If you lay them one on top of the other the system doesn't work the way it's supposed to.

 

3. Customer's feedback

https://skymen.en.made-in-china.com

https://skymen.en.made-in-china.com

 

4.Why do you need ultrasonic cleaner

Like the old solvent cleaning system an ultrasonic cleaning system consists of a tank that holds the ultrasonic cleaning solution.  Biodegradable and safe, the solutions usually come in concentrated form and are diluted to manufacturers' specifications.  Along with the tank an ultrasonic cleaner consists of an ultrasonic generator and ultrasonic transducers that are firmly attached to the bottom or sides of the tank.

When the unit is turned on the ultrasonic transducers create billions of microscopic bubbles in the cleaning solution.  Engine parts are placed in a mesh basket, on a rack, or otherwise suspended in the solution and the cleaning cycle begins as the bubbles implode with tremendous force upon contacting the parts.  Dirt, grime, grease, carbon deposits - all contaminants are stripped off of the parts without damaging them.

So tiny are the cavitation bubbles that they penetrate cracks, crevices and blind holes - areas impossible to reach by manual scrubbing.

At the end of the cleaning cycle parts are removed, rinsed and dried.  A rust inhibitor is applied and the parts are ready for reassembly.

5.Specification

Model	JTS-1072(digital,power adjustable)
Tank size	Customizing
Unit size	Pending
Box packing	Pending
Ultrasonic power	1440W~3600W
Heating power	12KW
Timer:	1~99min adjustable
Heater	20~80C adjustable
Frequency	28,000Hz
Tank capacity	Customizing
G.W.	Pending
power adjustable	40%-100%

 

6.Detailed Picture

Breif Look 

 

With Free Basket

 

Digital Control Panel

 

 

7.Feature Of JTS-1072

 

(1) Big Capacity For Large Quantity Cleaning

 

(2) Lift Up Function can be Designed

 

(3) Filter System can be Designed

 

(4)Power Adjustable will make you choose a suitable condition for your parts

 

8.Lift Up Function

 

Some auto parts is too heavy to move in cleaning tank, so we design a auto lift up system for you to improve your cleaning Job.

 

Picture attached

 

9.Filter System

 

Most auto parts is coverd by oil so if you choose a filter system, it will save cleaning solution and reduce second pollution to enviroment.

 

Picture attached:

 

 

10. Package and Delivery

 

It will be packed by a wood case with shipping standard.

 

Pictures attached:

 

 

Delivery: it will be sent  20days after your payment.

 

11.Company Profile

 

Skymen is the leading manufacturer of ultrasonic cleaner for 10 years. We are offering kinds of specifications and types of ultrasonic cleaners.In North America, the U.S., Canada, Europe and Britain, France, Belgium, Germany, Spain, Japan, China and Asia are selling.

We manufacture products include household ultrasonic cleaners, desktop cleaning machine, small medical ultrasonic cleaners, electronic ironware cleaning machine, jewelry ultrasonic cleaners, ultrasonic vibration plate, etc, we also provide custom service, can offer different specifications according to the customer demand of ultrasonic cleaners.

Company headquarters is located in Asia's financial center Hong Kong, factory set up in shenzhen, China, the geographical position is superior, the beautiful environment, convenient transportation. The company for global customers to provide quality ultrasonic cleaning machine series products, diverse styles and specification complete, the quality is reliable, the price is reasonable, welcome to contact with us, sincere cooperation with you! 

12.Certification

 

ISO certificate:

 

 

CE,RoHS,FCC

 

 

 

High Tech Company Certificate